ISDB-T-car-digital-TV

¥0.00

  • Product Code:
  • Availability: In Stock

- +

PRODUCT DESCRIPTION

Fiber optic video transceivers can simultaneously transmit 1-8 channels of 8-bit digitally encoded broadcast quality video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet / Telephone / Dry contact over one multimode or single-mode optical fiber.

These multiplexers are typically used in applications where the cameras have P/T/Z capabilities.

Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

 

PRODUCT CHARACTERISTICS                

8-bit digitally encoded and non-compression broadcast quality video transmission

Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols

Support any high-resolution video signal

Automatic compatible PAL, NTSC and SECAM video system

Power supply and other parameter state indication, which can monitor the operation condition of system

Support no-damage regenerative trunk of video

Constant input optical power, and large dynamic range, no Electrical or Optical Adjustments Required .

Special ASIC design.

Industry-grade of operating temperature from -40℃to 85℃, which is applied to the different working environment

Hot-swap function

Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

 

APPLICATIONS

Intelligent Transportation System
Connection of Sub-network for Surveillance Center
Public Security Surveillance
High Way & Toll Station Surveillance
High Quality Video Conference
Industrial Closed Circuit Television Surveillance

Coliseum using for TV-live ,audio transmission

 

APPLICATION TABLE

19'' 1U Rack Mount Digital Optical Fiber 16 Channel Video Converter19'' 1U Rack Mount Digital Optical Fiber 16 Channel Video Converter

 

Technical Specification

Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )

Operating Temperature: -40℃to +85℃

Storing Temperature : -55℃ to +85℃

Humidity: 0 to 95% non-condensing

MTBF: ≥ 105 hours

Warranty: 3 years

 

Video channels

1 channel

Video bandwidth

8 MHz

Automatic compatible video system

PAL, NTSC, SECAM

Video input / output impedance

75 Ω (unbalance)

Video signal-to-noise ratio

≥67dB

Differential gain

(10%-90%APL) DG <1% (typical value)

Differential phase

(10%-90%APL) DP <0.7° (typical value)

Video connector

BNC

Fiber-optic Specification

F/O connector: FC/ST/SC

TX: Power: -5 ~ -0dBm     Sensitivity: ≤-34dBm

RX: Power:-5 ~ -0dBm     Sensitivity: ≤-34dBm

Transmission Distance: 60KM (single mode)  

Operating Wavelength: TX1310/RX1550nm (Transmitter)

TX1550/RX1310nm (Receiver)

Specification of custom-made options

Data

Connector: Terminal Blocks

Encoded type: RS485 / RS422 / RS232 / Manchester      

Data rate: 0 - 400Kbps

BER: ≤10-9

Audio

Connector: Terminal Blocks

Audio input / output impedance: 600Ω (Balance/ unbalance)  

Audio input / output voltage :2Vp-p ( typical value)

Audio input / output level :0dBm ( typical value)

Video bandwidth:10HZ~12KHZ

Audio digital encoded bandwidth :24bit

Audio signal-to-noise ratio: S/N≥95dB   (weighted)

Telephone

Connector: RJ11

Bandwidth :8KHZ

Features:Support call-showing function ;support H-F

Operating mode : Point to point hotline mode / FXS-FXO  

Ethernet

Connector: RJ45

Support mode : Half duplex or Full duplex

Standards:IEEE802.3

Data rate : 10M / 100Mbps

Bandwidth: 25M

Dimensions: 11.1(L)×10.7(W)×2.8(H) cm

 

Video channels

4 channels